Electronic identification

of laboratory animals

GESREADER II

Features:

- small size hand held reader

- reads ISO compatible RF-ID transponders for animal identification

- a memory capacity to store approx. 1450 readings

- a RS232 port/connection for communication with the PC

- the possibility to make your own list of observation codes and record an observation with a transponder reading

- the possibility to make and show your own alpha nummeric equivalent transponder code

- possibility to connect a stick antenna .

Memory

Apart from reading a transponder code which can be seen in the LCD display of the GesReader II,

the transponder code can also be stored in the internal memory of the reader. This memory can simply

be downloaded to the PC as an ASCII file.

 

A read-out on the PC of the transponder codes from the memory is as follows:

 

A 000 00000 0 0983 000000056824

A 000 00000 0 0983 000000056820

A 000 00000 0 0983 000000056822

A 000 00000 0 0983 000000056821 (bold =)ISO transponder code (16 digits)

Observation codes

Sometimes it is necessarry to record specific observations of each individual animal during the study.

The GesReader II makes it possible to record an observation code to the transponder reading of an

individual animal.

 

After reading the transponder code of an animal, the required observation can be selected from the

pre-arranged downloaded list of the 10 most important observations for that particular study.

 

Transponder code + observation code will be stored in a memory.

 

For a next study, a new list of 10 observations can be made in the PC and downloaded to the reader.

Example of a list of observation codes and diplay of the observation codes together with

transponder codes after downloading to PC.

Display after downloading to PC.

A 009 00000 0 0983 000000056824

A 009 00000 0 0983 000000056820

A 009 00000 0 0983 000000056822

A 004 00000 0 0983 000000056821 (Italic)

= Observation code (3 digits) (Bold =) ISO Transponder code (16 digits)

Equivalent codes

The ISO transponder code is a 16 digit code (including the first "0"). These 16 digits codes are

very long and not always easy to work with.

The GesReader II has the possibility to prepare your own selected equivalent alpha-nummeric

code and have it fixed to the transponder code.

When reading a transponder, both the 16 digit transponder code, as well as the own selected

alpha-nummeric equivalent code are displayed

on the LCD of the GesReader II.

 

 

Example of reading on LCD of GesReader II: RAT 002 TOX

0981098100118900

Specifications

Model	GESReader II
RS-232 Interface	Yes
External Stick Antenna (optional)	Yes
Data Storage	± 1450 reading
Memory Download	Yes
Observation codes	Yes
Equivalent transponder numbers	Yes
Temperature	While operating reader: +5 ... +40°C During storage: -10 ... +55°C
Relativ humidity	85% non-condensed
Typical reader distance	± 23 - 50cm HDX transponder (depending on model) ± 6 - 26cm FDX-B transponder (depending on model)
Schock	IEC68.2.27 std (15g - 11m/s 3 assen)
Vibration	IEC 68.2.26 std (10 ... 50 Hz - 0,75mm)
Impact	IEC68.2.32 std (2x distance 1m)
Voltage	9V Alkaline of 9V NiCD/NiMH rechargable battery
Weight incl. 9V Battery	230 gram
Dimensions	205 x 100 x 65mm
* subject to change without prior notice.

- Home - Housing - Infusion - Identification

- Anesthesia/Euthanasia - Mobile Unit - Contact us -

UNO Roestvaststaal BV

*Phone: +31 316 524451 * Fax +31 316 523785 * Email: info@unobv.com