UNO Controlled Heating System
The UNO Heating System has been designed specially for the use with small laboratory animals, like mouse and rat during anaesthesia. The controlled Heating System contains 1 Control Unit and at least one of the heating elements mentioned below. Make sure that at all time 2 devices are connected to the control unit. (If you have only 1 device to use, you need to use a dummy plug.)
Control Unit
The control unit has two connector sockets, for heating elements and for the temperature probe. The temperature settings for the heating devices range from 28-42˚C, while the temperature will give an alarm (beep) when the recorded temperature is below 28˚C for longer than 10 minutes.
Flat Heating Plate
12mm thick, easy to be set and maintained at the required temperature. Dimensions: 34,5 x 23cm.
"Half-pipe" heating device
For temperature control of rats during a prolonged period during procedures under anaesthesia such as cardiac flow measurement, during multiple blood sampling from the tail with the tail heating device, or other prolonged procedures.
Rat Tail heating device
To be used for instance with blood sampling. (With or without the "half-pipe" heating system).
For blood collection containers follow this link.
Temperature Probe
For rectal temperature measuring in rats.
Add on
Aluminium add on to the flat heating plate. To keep a maximum of 4 mouse in place. This can f.i. be used combined with the UNO Multi Face Masks.